What Is ComfyUI? The Node-Based AI Studio Behind a Million Images

What Is ComfyUI? The Node-Based AI Studio Behind a Million Images

Open an image generator and you usually get a box: type a prompt, press a button, get a picture. It works, but you never see what happened in between — which model ran, how the image was refined, what was upscaled and what was not. If the result is wrong, all you can do is type a different prompt and hope for better luck.

ComfyUI takes the opposite approach: it opens the machine up and shows you every step. Instead of a single box, you get a canvas of small blocks — called nodes — connected by lines: one loads the model, one holds your prompt, one runs the sampler that turns noise into an image, one decodes it, one saves the file. You can see the whole pipeline, change any step, and run it again. That idea has made ComfyUI the most widely used open interface for AI image, video, audio and 3D work.

The numbers tell the story. ComfyUI is published in the repository listed as Comfy-Org/ComfyUI, under the GPL-3.0 licence, and as of 14 November 2026 it has about 147,000 stars. Its latest release, v0.45.0, shipped on 10 November 2026, and its last code change landed five days later. The company behind it, Comfy Org, raised $30 million in April 2026 at a $500 million valuation, and claims more than 4 million users.



What Is ComfyUI, in Plain Words?

ComfyUI is a free, open-source program that runs on your own computer and turns text prompts — and images, video and audio — into new media using AI models. It is a front end for diffusion models such as SDXL, Flux, Qwen and Wan: the models do the generating, and ComfyUI is the workshop where you connect them.

The difference is the node graph. Most image generators hide the pipeline behind one button. ComfyUI draws it on screen as a flowchart: each node is one job — load a checkpoint, encode a prompt, run the sampler, decode the result, save the file — and the lines show how data flows between jobs. Want a different sampler? Swap one node. Want two images from the same prompt? Branch the graph.

That makes ComfyUI a tool for people who want control. A casual user who only wants a quick picture will find it more work than a one-box generator. A designer, artist or studio that needs the same result a hundred times, with one setting changed each time, will find it is the only tool that does the job properly.

The Node Graph: How ComfyUI Actually Works

The best way to understand ComfyUI is to follow one picture through the graph. A basic text-to-image workflow uses five or six nodes — and once you have seen it, the whole program makes sense.

First, the checkpoint loader loads the model — an SDXL checkpoint, a Flux model, or a Qwen image model. Second, two text-encoding nodes hold your prompts: the positive prompt describing what you want, and the negative prompt describing what you do not want. Third, the sampler — usually called KSampler — does the real work: from random noise, it shapes a picture step by step, guided by the prompts and the model. Fourth, the VAE decoder turns the result into an image you can see. Fifth, the save node writes the file to disk.

That is the whole secret: every ComfyUI workflow is a chain of small, visible steps, and you can rearrange them. Want to upscale the result? Add an upscale node after the VAE. Want to change only the background? Add an inpainting node and mask the area. Want the same character in ten poses? Branch the sampler ten ways. Each change is one node.

Two features make the graph practical. First, a workflow is a file: save it, share it, or load someone else's to reproduce their exact result, settings included. Workflows are stored as JSON, which is why whole communities trade them like recipes. Second, ComfyUI runs only the nodes that need to run. Change the prompt and it re-runs the sampler, not the model load — which is why it is faster and lighter on memory than tools that reload everything for every image.

The same node idea works beyond images: video (a video model, frames instead of one picture), audio (text-to-audio or music), and 3D (nodes that build meshes and textures). The nodes change; the way of working does not.

What Can ComfyUI Actually Do? Its Functions Explained

ComfyUI's functions fall into a few clear groups — here is what each one means in plain language.

1. Image Generation With Full Control

This is the core use: text-to-image, image-to-image, inpainting, upscaling and face restoration, with every setting exposed. You choose the model, the sampler, the number of steps, the guidance strength and the seed — the number that fixes the random starting point, so the same seed and settings reproduce the same image. Supported models include SDXL, Flux, Qwen and Wan. Because the graph is visible, you can build pipelines a one-box tool cannot express: generate a base image, upscale it, then run a detail pass over just the face — all in one graph.

2. Video Generation, Locally and in the Cloud

ComfyUI runs video models the same way it runs image models. Local video models include MiniMax and Wan — v0.44.0, released 4 November 2026, added local support for the MiniMax H3 omni-modal model, including context windows, a latent upscaler and video editing nodes, plus ProRes video export with chroma subsampling for editors who need broadcast-quality output. For models too heavy to run at home, Partner Nodes call hosted video models from inside the graph instead.

3. Audio and 3D Work

ComfyUI is not only a picture tool. Audio nodes generate music and sound from text, and 3D nodes build meshes, textures and turntables from images or prompts. These are newer and smaller than image generation, but they run on the same node system, so one workflow can generate a character image, turn it into a 3D model, and render it — all in one graph.

4. Partner Nodes: Closed Models Inside an Open Graph

Partner Nodes are Comfy Org's bridge between the open engine and commercial models. From inside a graph you can call hosted models such as Kling, Veo, OpenAI image models, Luma, ElevenLabs, Seedance, Pika, Gemini and ByteDance models, paying from a prepaid credit balance. v0.45.0, released 10 November 2026, expanded these integrations across video, image, audio and language-model providers. The honest point: they are convenient, but not local — your prompt and data go to the provider, and you pay per use.

5. Custom Nodes and ComfyUI-Manager: 60,000 Extra Parts

The community has built more than 60,000 custom nodes — extra blocks that add new models, effects, loaders and tools. ComfyUI-Manager is the built-in package manager that finds, installs and updates them, and the Comfy Registry lists them. This is the ecosystem that keeps ComfyUI ahead: when a new model appears, someone usually ships a node for it within days. The trade-off is trust — a custom node is third-party code on your machine, so install nodes from authors you recognise.

6. Workflows, Queues and Batch Runs

ComfyUI treats a workflow as a reusable recipe: save it, share it, load it on another machine and it runs the same way. The queue runs jobs one after another, so you can set up fifty variations and let the computer work through them. With the seed system, this is what makes ComfyUI a production tool: the same graph, run a hundred times, with one value changed each time.

FunctionWhat it doesExample in daily use
Image generationText-to-image, inpainting, upscaling, face workSame character, ten poses, one graph
Video generationLocal MiniMax and Wan video; ProRes exportTurn an image into a short clip
Audio and 3DText-to-audio, music, meshes and texturesImage to 3D model in one workflow
Partner NodesHosted models inside the graph, prepaid creditsKling or Veo video without a local GPU
Custom nodes60,000+ community blocks via ManagerNew model support within days
Workflows and queueSaveable recipes; batch runs with seedsFifty variations overnight, unattended

ComfyUI vs AUTOMATIC1111: What Is the Difference?

Anyone researching ComfyUI will meet its older rival, Stable Diffusion web UI — usually called AUTOMATIC1111, after its author's username. It was the first popular interface for Stable Diffusion, and many tutorials were written for it. The two programs do the same broad job, but they are in very different states today.

The facts are plain. AUTOMATIC1111 has about 165,000 stars — more than ComfyUI's roughly 147,000 — but its last code change was on 27 July 2024, and its latest release, v1.10.1, dates from February 2025. ComfyUI's last code change was on 15 November 2026, and it ships a new release roughly every week; v0.45.0 arrived on 10 November 2026, six days after v0.44.0. That is a statement about maintenance, not quality: AUTOMATIC1111 was a good tool, and much of what it pioneered shaped everything that followed. But a program with no commits in more than two years gets no new model support, security fixes or performance work, and new models such as Flux, Qwen and Wan are built for ComfyUI first.

The design difference matters too. AUTOMATIC1111 is a fixed web interface with tabs; ComfyUI is a blank canvas where you build the interface yourself from nodes. The fixed interface is easier on day one; the canvas is more powerful on day one hundred, because you build exactly the pipeline you need.

ComfyUIAUTOMATIC1111
Stars (Nov 2026)About 147,000About 165,000
Last code change15 Nov 202627 Jul 2024
Latest releasev0.45.0 (10 Nov 2026)v1.10.1 (Feb 2025)
InterfaceNode graph you buildFixed tabs and panels
LicenceGPL-3.0AGPL-3.0
MediaImage, video, audio, 3DMainly image

How to Install ComfyUI

There are three ways to install ComfyUI. All three run the same engine — the right one depends on how comfortable you are with a computer.

The easiest route, and the one Comfy Org now recommends for new users, is Comfy Desktop: a complete rewrite that acts as a manager for multiple installations, currently v1.1.9, published on 6 November 2026. Download it from the official ComfyUI download page for Windows or macOS, install it like any other app, and it handles the Python environment, the model folders and updates for you. The older desktop repository is archived — if a tutorial points you at it, find the current desktop release instead.

The second route is the portable build: a single archive of about 1.4 GB for Windows that you extract and run, with no installation step — best for a USB drive, a second disk, or several separate installs. macOS has one too.

The third route is the manual install: install Python and PyTorch yourself, download the program files, place your model files in the models folder, and start it from the command line. It takes longer and you are responsible for every dependency — but it is the route that teaches you how the program is put together, and the one developers use.

Before you install, check the hardware. ComfyUI needs a graphics card for practical use — NVIDIA, AMD, Intel, Apple Silicon and Ascend hardware are all supported, though NVIDIA is the smoothest path. The minimum is 8 GB of system RAM. For SDXL at 1024 by 1024 pixels, the practical video-memory floor is about 4.5 GB, and the program's own documentation says even the largest open models can run on as little as 4 GB of video memory plus 8 GB of RAM using weight streaming — slower, but it runs. A card with 8 GB or more is comfortable for SDXL and Flux; video models want more. Without a graphics card, ComfyUI runs on a CPU, but generation becomes very slow — minutes per picture instead of seconds.

Using ComfyUI With Ollama: Local AI, Two Ways

ComfyUI and Ollama are the two halves of a fully local AI setup. Ollama runs large language models on your own computer — chat, writing, coding help — while ComfyUI runs image, video and audio models on the same machine. Neither sends your work to a server, and neither charges per use. Our Ollama post on Tech Know, published 13 November 2026 (What Is Ollama? How to Run AI on Your Own Computer, Free and Private), walks through installing Ollama and choosing a model size for your hardware. The practical setup is Ollama for words and ComfyUI for pictures — write a prompt with a local language model, then generate the image with a local diffusion model, all without an account or a subscription.

What Does ComfyUI Cost?

The engine costs nothing. ComfyUI is free and open source under the GPL-3.0 licence: download it, run it, modify it, use it for commercial work, and pay Comfy Org nothing.

First, the hardware: a graphics card with enough video memory, and the electricity to run it. Second, the models: the open models ComfyUI runs locally — SDXL, Flux, Qwen, Wan — are free to download, but each model has its own licence, so check it before commercial use. Third, the optional paid services: Comfy Cloud, the hosted version from $20 a month, for people without a GPU; Partner Nodes, billed per use from prepaid credits; and Comfy Enterprise, the paid tier for studios.

The honest summary: with a decent graphics card, ComfyUI costs $0 and stays $0. You only pay when you choose a hosted model or a hosted machine instead of your own.

RouteCostBest for
Local install, open models$0Full privacy, no per-use bill
Comfy CloudFrom $20/monthNo GPU of your own
Partner NodesPrepaid credits, per useHosted video and image models
Comfy EnterprisePaid, quotedStudios and teams

Who Should Use ComfyUI — and Who Should Not

ComfyUI suits people who want control over every step of image, video or audio generation: digital artists who need repeatable results, video editors and VFX artists building effects pipelines, game developers generating textures and concept art, photographers retouching with inpainting and upscaling, and studios that need the same workflow to run a hundred times without variation. It also suits anyone who cares about privacy: everything runs on your own machine unless you choose a Partner Node.

It is less suited to people who want a picture in ten seconds with no learning — your first afternoon goes to understanding what a sampler, a VAE and a latent image are. It is also the wrong choice with no graphics card and no budget for cloud time: CPU generation is too slow for real work. If you only generate the occasional image for a presentation, a simple hosted generator will serve you better.

The Story So Far: From a Solo Project to a $500M Company

ComfyUI's business story is unusual, because the company came after the code. The project began on 1 January 2023, when comfyanonymous — later confirmed as Yannik Marek, a programmer from Quebec City — started writing a better interface for Stable Diffusion. It grew by word of mouth among artists who wanted control, and by June 2024 Comfy Org was formed, bringing together the people behind ComfyUI-Manager, the frontend rewrite, the registry and the command-line tool.

Funding followed the users. A Series A of $19 million closed in late 2024, led by Chemistry Ventures. Then, on 24 April 2026, Comfy Org announced a $30 million growth round at a $500 million valuation, led by Craft Ventures, with Pace Capital, Chemistry and TruArrow participating — bringing total funding to about $47 million, and claiming more than 4 million users, 60,000-plus community nodes, 150,000-plus daily downloads, and a customer logo wall including Netflix, Apple, Ubisoft, Amazon Studios, Autodesk, Nike and Tencent.

Those figures are the company's own claims, not independently audited counts. What is verifiable is the activity: about 147,000 stars, a new release roughly every six days, 29 stable releases in the past year, and a last commit one day before this article was written. A project that ships that often does not need a valuation to prove it is alive.

The Honest Downsides

No honest article about ComfyUI should skip its weak points. First, the learning curve is real: nodes, samplers, VAEs, latents, control nets — the vocabulary alone takes an afternoon, and a bad result can fail in ways that are hard to diagnose if you do not understand the graph. Second, it moves fast: a new release roughly every six days means tutorials go stale quickly and custom nodes break after updates. Keep backups of workflows that matter.

Third, the ecosystem is a strength and a risk. Custom nodes are third-party code, and a bad or abandoned node can break your install or, in the worst case, run malicious code on your machine. Install nodes from authors you recognise and read what a node does before installing it. Fourth, hardware is a real cost: video generation wants a strong GPU with plenty of video memory, and a weak card means long waits. Fifth, the licence matters if you build a business on it: GPL-3.0 means the engine is free to use, including commercially, but if you distribute a modified version of ComfyUI itself, you must release your changes under the same licence — and each AI model has its own licence too.

Frequently Asked Questions

Is ComfyUI really free?

Yes. ComfyUI is free and open source under the GPL-3.0 licence: download it, run it, modify it and use it for commercial work without paying Comfy Org anything. You only pay for optional extras: hosted cloud machines, or Partner Nodes that call commercial models per use.

What is the difference between ComfyUI and AUTOMATIC1111?

Both are interfaces for the same kind of AI models, but ComfyUI is a node graph you build yourself, while AUTOMATIC1111 is a fixed web interface with tabs. More importantly, ComfyUI is actively maintained — last code change 15 November 2026, latest release v0.45.0 — while AUTOMATIC1111 has had no code change since 27 July 2024.

Which version should I install?

Install the latest stable release, v0.45.0, published 10 November 2026 — easiest via Comfy Desktop, currently v1.1.9 (6 November 2026). Patch tags v0.45.1 and v0.45.2 followed on 10 and 11 November: small fixes on the same release.

Can I run ComfyUI without a graphics card?

Technically yes, practically no. It will run on a CPU, but generation becomes very slow — minutes per image instead of seconds. For real work you need a GPU: about 4.5 GB of video memory is the floor for SDXL at 1024 by 1024 pixels, and 8 GB or more is comfortable. Without a GPU, Comfy Cloud (from $20 a month) is the alternative.

Can ComfyUI generate video and audio, or only images?

It generates images, video, audio and 3D. Video models include MiniMax and Wan, with ProRes export added in v0.44.0. Audio nodes cover text-to-audio and music, and 3D nodes build meshes and textures. Image generation is the most mature part.

Do I need to know how to code to use ComfyUI?

No. You build workflows by dragging nodes and connecting them — no programming is required. Comfy Desktop removes the command-line step; what you need is patience to learn what each node does.

Is my work private with ComfyUI?

With local models, yes: nothing leaves your computer, and there is no account. With Partner Nodes or Comfy Cloud, your prompts and data go to the provider, and its terms apply. For private work, stay local.

Can I use ComfyUI with Ollama?

Yes, side by side: Ollama runs language models locally, ComfyUI runs image, video and audio models locally. Our Ollama post on Tech Know (13 November 2026) explains the Ollama half.

The Bottom Line

ComfyUI is the most powerful open interface for AI image, video, audio and 3D work, for one simple reason: it shows you the machine. Instead of a prompt box that hides the pipeline, you get a graph of nodes you can see, change, save and share — running on your own computer, on free open models, under a licence that belongs to everyone. With about 147,000 stars as of 14 November 2026, a new release roughly every week, and studios from Netflix to Ubisoft on its customer wall, it is the tool the serious side of AI generation has standardised on.

It is not for everyone: the learning curve is real, it wants a decent graphics card, and it ships fast enough that guides go stale. But if you generate images or video often and want the same result twice, with one setting changed, and to know exactly how it was made — there is no better place to start. Install Comfy Desktop, load the default workflow, and change one node at a time.

By Umar Farooq, Tech Know.

Post a Comment

0 Comments